Command Reference Guide CA Profile Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1221
fqdn <fqdn>
Use the fqdn command to specify a fully-qualified domain name (FQDN) to be included in the certificate
requests.
Syntax Description
<fqdn> Specifies the FQDN (e.g., company.com) to be included in requests.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the FQDN only once
rather than every time you go through the enrollment process. Refer to
crypto ca enroll <name> on page
361.
Usage Examples
The following example specifies company.com as the FQDN to be sent in certificate requests:
(ca-profile)#fqdn company.com
