Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 813
ip mcast-stub helper-enable
Use the ip mcast-stub helper-enable command to assign the ip mcast-stub helper-address as the IGMP
proxy. Use the no form of this command to disable.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 8.1 Command was introduced.
Release 11.1 Command was expanded to include the demand interface.
Functional Notes
This command is used in IP multicast stub applications in conjunction with the ip mcast-stub
helper-address, ip mcast-stub upstream, and ip mcast-stub downstream commands. When enabled,
the interface becomes a helper forwarding interface. The IGMP host function is dynamically enabled and
the interface becomes the active upstream interface, enabling the unit to perform as an IGMP proxy. Refer
to
ip mcast-stub helper-address <ip address> on page 434, ip mcast-stub downstream on page 812, and ip
mcast-stub upstream on page 814
for more information.
Usage Examples
The following example sets the helper address as the IGMP proxy:
(config)#interface demand 1
(config-demand 1)#ip mcast-stub helper-enable
