A SERVICE OF

logo

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 41
clear bridge <group#>
Use the clear bridge command to clear all counters associated with bridging (or for a specified
bridge-group).
Syntax Description
<group#>
Optional. Specifies a single bridge group (1 to 255).
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example clears all counters for bridge group 17:
>enable
#clear bridge 17