A SERVICE OF

logo

Open as PDF
next previous
Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 64
clear ip route [** | <ip address> <subnet mask>]
Use the clear ip route command to remove all learned routes from the IP route table. Static and connected
routes are not cleared by this command.
Syntax Description
** Deletes all destination routes.
<ip address> Specifies the IP address of the destination routes to be deleted.
<subnet mask> Specifies the subnet mask of the destination routes to be deleted
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example removes all learned routes from the route table:
>enable
#clear ip route **