Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 508
snmp-server location <“string”>
Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP)
system location string. Use the no form of this command to return to the default value.
Syntax Description
<“string”> Populates the system location string using an alphanumeric string enclosed in
quotation marks (up to 32 characters in length).
Default Values
By default, the snmp-server location is set to ADTRAN.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies a location of
5th Floor Network Room
:
(config)#snmp-server location “5th Floor Network Room”
