A SERVICE OF

logo

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 451
ip snmp agent
Use the ip snmp agent command to enable the Simple Network Management Protocol (SNMP) agent.
Syntax Description
No subcommands.
Default Values
By default, the SNMP agent is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Functional Notes
Allows a MIB browser to access standard MIBs within the product. This also allows the product to send
traps to a trap management station.
Usage Examples
The following example enables the IP SNMP agent:
(config)#ip snmp agent