Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 56
clear ip dhcp-server binding [* | <ip address>]
Use the clear ip dhcp-server binding command to clear Dynamic Host Configuration Protocol (DHCP)
server binding entries from the database.
Syntax Description
* Clears all automatic binding entries.
<ip address> Clears a specific binding entry. Enter the source IP address (format is A.B.C.D).
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Functional Notes
A DHCP server binding represents an association between a MAC address and an IP address that was
offered by the unit to a DHCP client (i.e., most often a PC). Clearing a binding allows the unit to offer that IP
address again, should a request be made for one.
Usage Examples
The following example clears a DHCP server binding for the IP address 125.25.47.4:
>enable
#clear ip dchp-server binding 125.25.47.4
