A SERVICE OF

logo

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 310
show thresholds
Use the show thresholds command to display thresholds currently crossed for all DS1 interfaces.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
>enable
#show thresholds
t1 1/1:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 1/2:
No thresholds exceeded