Microplate Luminometer System Description
16
The front side of the injector unit includes a detachable tray for
the reagent bottles. On the rear panel you have access to the
following ports:
power switch power cord connector
0
I
Voltage selection switch Connection to
115 V / 230 V MONOLIGHT 3096
2.4 Microplates
All 96 well microplates in standard format can be measured on
the MONOLIGHT 3096 Microplate Luminometer.
To obtain reliable, accurate results, you should only use non-
transparent (opaque) microplates.
Black microplates show the lowest crosstalk, but they absorb
light, i.e. they are not suitable for samples with low light intensity.
White microplates are well suited since they reflect the light
from the samples and thus increase the sensitivity, but may
increase background.
For general use we recommend the Falcon
®
black opaque
microplate, Cat. No. 01-05500.
Figure 2-9:
Rear panel o
injector unit with
connection ports
