Microplate Luminometer Slow Kinetics
70
[Auto-send to...] Upon completion of the measurement, the
Excel macro is automatically sent to the Ex-
cel program and executed there.
[Workbook] Selection of workbook. Click on <...> to dis-
play the browser. The subdirectory Sim-
plicity\workbook is defaulted.
[At cell] The measured data are read, starting at
this cell of the Excel spreadsheets
[Excel(TM) macro] Entry of an Excel macro.
[Comment] tab
The comment entered here appears, after the protocol has been
saved, in the Protocol Manager next to the measurement proto-
col list when the respective measurement protocol is selected.
The following buttons appear on all tabs of the entire measure-
ment protocol:
<Save As...> is selected to define a new file name. This is necessary in order
to create a new measurement protocol, or to save an existing
measurement protocol under a new name. Clicking on this but-
ton opens the [Save As...] dialog box. Enter a file name which
differs by at least one character from the file name of the se-
lected protocol type. As soon as the protocol has been saved,
the program returns to the Protocol Manager and shows the
name of the new measurement protocols in the field [Runable
protocols].
Figure 6-7:
Input field for a
comment on the
measurement
protocol
