A SERVICE OF

logo

Open as PDF
next previous
Microplate Luminometer Slow Kinetics
64
6.2 Measurement Protocol
In the Protocol Manager, select the protocol type [Slow Kinetics]
and click <Create...>.
In the Protocol Manager, select an existing measurement pro-
tocol and click <Edit...>.
The [Slow Kinetics Parameters] dialog box with several tabs is
displayed and you can enter the measurement parameters
(Figure 6-1).
[Plate Timing] tab
The following mutually dependent parameters must be taken
into account for the kinetics measurement:
• the number of data points
• measurement time per well = 1 sec
• the number of samples to be measured
• the number of injections per well
• the delay time between injection(s) and measurement time
• the expected duration of the light emission of the samples
Creating a new
measurement
protocol
Editing an existing
measurement
protocol
Figure 6-1:
[Plate Timing] tab in
the [Slow Kinetics]
dialog box