Microplate Luminometer Raw Data
54
5. Raw Data
5.1 Overview
The function Raw Data allows you to run measurements with
minimum preparations. The measurement starts as soon as
you have entered the measurement parameters and defined the
wells to be measured. Then the measured data are transferred
to the PC every 0.2 seconds and the averaged results are dis-
played on the screen in a sample matrix. The measured results
can then be imported into EXCEL for further processing.
5.2 Measurement Protocol
In the Protocol Manager, select the protocol type [Raw Data]
and click <Create...>.
In the Protocol Manager, select an existing measurement pro-
tocol and click <Edit...>.
The [Raw Data PC Parameters] dialog box appears, with the file
name of the measurement protocol being displayed on the title
bar. This dialog box comprises several tabs for input of the
measurement parameters (Figure 5-1).
Creating a new
measurement
protocol
Editing an existing
measurement
protocol
Figure 5-1:
[Timing] tab in the
[Raw Data
PC Parameters]
dialog box
