Microplate Luminometer Installation and Commissioning
28
3.8 Program Start
To start the Simplicity PC program, click the Windows 95
<Start> button, then select [Programs] and [Simplicity PC].
Simplicity PC is loaded and the Protocol Manager displayed
with two tabs (see Figure 3-8).
The program is configured such that the instrument is initialized
only upon selection of the measurement menu (<Run>). In this
manner you can first define the communication port used.
You can change this presetting in the [Instrument Options]
dialog box, so that the initialization takes place when the
program is started (see section 3.9 Instrument Configuration). In
this case, communication with the luminometer is checked
when the program is loaded. When the communication has
been established, the program is fully operational. Otherwise,
you cannot call the measurement menu.
Figure 3-8:
Simplicity
Protocol Manager
