9-7
Restoring a deleted audio file
You can restore a deleted audio file.
1. While stopped, press the [SHIFT] key to turn on the indicator.
2. Press the [SETUP] key.
The unit enters the Utility mode.
The first time the unit enters the mode after turning on the power, the "Rec Protect?" menu appears.
3. Use the jog dial to select the "Restore DelFile?" menu and press the [ENTER/YES] key.
The name of a deleted audio file flashes on the display.
4. Use the jog dial to select the file you want to restore and press the [ENTER/YES] key.
If there is more than one deleted audio file, you can select a desired file using the jog dial.
Pressing the [ENTER/YES] key restores the file immediately and the display shows "Completed!" followed
by "Restore DelFile?".
5. Press the [EXIT/NO] or [STOP] key to exit the Utility mode.
The display shows the beginning of the restored file.
Tips:
The restored file is numbered the same as before it was deleted.
<Note>
The restored audio file returns to the position where it was before the delete operation.
However, the editing data carried out before deleting the file does not remain, therefore, you cannot
carry out the undo operation with the restored file.
Flashing
Flashing Flashing
