17-3
Pin 5: <<
The "low" pulse activates the function equivalent to the [|<<] key.
* The minimum effective input pulse width is 15 milliseconds (except Pin 2 [PLAY]
whose minimum pulse width is 5 milliseconds).
GPI OUT
Pin 1: GND
Pin 2: EVENT 1
Outputs the event of CUE POINT 1
Pin 3: EVENT 0
Outputs the event of CUE POINT 0
Pin 4: EVENT 2
Outputs the event of CUE POINT 2
Pin 5: EVENT 3
Outputs the event of CUE POINT 3
* A 60-msec width low level pulse can be output from each event output during play
back or recording.
TIME CODE INPUT
• Connector : XLR-3-31 type (balanced, pin 2: hot)
• Format : SMPTE/EBU
• Nominal input : 2 V p-p
• Transmission rate : 2.4 kbit/sec (SMPTE)
• Input impedance : 20k Ω or more
• Minimum input level : 0.25 V p-p
TIME CODE OUTPUT
• Connector : XLR-3-32 type (balanced, pin 2: hot)
• Format : SMPTE/EBU
• Nominal input : 2 V p-p
• Output impedance : 1k Ω or less
• Applicable load impedance : 600 Ω or more
TIME CODE THRU
• Connector : XLR-3-32 type (balanced, pin 2: hot)
* Directly feeds the timecode received from the TIME CODE INPUT connector.
VIDEO INPUT
• Connector : BNC type
• Nominal input level : 1 V p-p (* with 75 Ω termination switch)
VIDEO THRU
• Connector : BNC type
* Directly feeds the video signal received from the VIDEO INPUT connector.
WORD INPUT
• Connector : BNC type
• Nominal input level : TTL level (* with 75 Ω termination switch)
WORD OUTPUT
• Connector : BNC type
• Nominal output level : TTL level
WORD THRU
• Connector : BNC type
* Directly feeds the word clock received from the WORD INPUT connector.
