9-4
Selecting an audio file
You can select an audio file by using the file select or skip function.
3. Use the jog dial or [SKIP/CURSOR] [|<<] / [>>|] keys to select a desired file number, and press the
[ENTER/YES] key.
The display shows the beginning of the selected audio file.
• Selecting a file using the file select function
The following assumes that three "BWF" and two "SDII" files are created on a disk and the "BWF
001" file is currently selected.
1. Select a desired audio file format between "BWF" and "SDII" using the [AUDIO FILE] switch.
If you select "SDII", "SDII" is lit instead of "BWF" in the FORMAT information area on the display.
2. Press the [FILE SEL] key.
"001", the audio file number of the selected file format in step 1, flashes on the display, showing that a file
number can be selected.
HMSF
PGM
LT C
NEXTPGM
• Selecting a file using the skip function
You can select an audio file using the [SKIP/CURSOR] ([|<<] / [>>|]) keys by setting the "Skip
Mode?" menu in the Setup mode to "File". "File" is the initial setting, therefore, as long as you
keep this setting, you can carry out the file selection using the skip function.
If the "Skip Mode?" menu is set to "CUE" or "MEM", change the option to "File".
See "Chapter 15: Setup mode" for details about how to set the "Skip Mode?" menu.
1. While stopped, press the [SKIP/CURSOR] [|<<] or [>>|] key.
Pressing the [|<<] key skips to the beginning of the previous audio file, while pressing the [>>|] key skips to
the beginning of the next audio file.
You can skip to the beginning of a desired file by pressing [|<<] or [>>|] key repeatedly as many times as
required.
When the file is skipped, the display shows the beginning of the selected audio file, as shown in the
examples below. where *********** shows a file name.
<Note>
Using the skip function, you can select an audio file among those in the same directory ("bwff" or "sd2f").
HMSF
PGM
LT C
HMSF
PGM
LT C
Skipped from "004" to "005".
Skipped from "004" to "003".
Tips:
By using the "File Sort?" menu in the Setup mode, you can sort audio files by name or date, allowing file
selection easier. See "Chapter 15: Setup mode" for details.
Tips:
By pressing the [FILE SEL] key after pressing the [SHIFT] key (to turn on the indicator), you can select
audio files from among both the file directories ("bwff" and "sd2f").
Flashing
