2-4
a. [RECORD] key
Normally, pressing this key starts recording when one of the AUDIO RDY indicators
([NEW FILE] or [INSERT]) is lit.
• In the NEW FILE mode:
Starts recording to a new file which is automatically created. If the "TC RDY" indicator
is lit, time code is also recorded.
• In the INSERT mode:
Starts recording from the current position of the current file. If the "TC RDY" indica-
tor is lit, time code is also recorded.
See "Chapter 4: Audio recording/playback" and "Chapter 5: Time code recording" for de-
tails.
<Note>
If you press the
[RECORD]
key when the
"REC PROTECT"
setting in the Utility mode is set to
"On"
,
"Protected!"
is shown and you cannot start recording.
8. Transport keys
b. [STOP] key
Normally, pressing this key stops the recorder.
In the Setup, Utility and all sort of editing mode, pressing this key exits the current
mode.
Also, pressing the [PLAY], [<< REWIND] or [>> F FWD] key while holding down this key
executes the following.
• [STOP] + [PLAY]
Plays back sound data on the clipboard and stops the recorder.
• [STOP] + [<< REWIND]
Locates to ABS 0 (the beginning position of the file) and stops the recorder.
• [STOP] + [>> F FWD]
Locates to REC END and stops the recorder.
LOCATE REC END
LOCATE ABS 0
F FWD
REWIND
PLAY
STOPRECORD
SOURCE PLAY
a
b
cd
e
6. [LIST PLAY] ([EDIT]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
Pressing this key allows you to select a list for executing the list play.
You can select between “SongLink” and “LTC_Link” lists.
After selecting the desired list, pressing the [PLAY] key starts the list play.
See “Chapter 11: List Play function” for details.
When SHIFTed:
Pressing this key enables editing of the recorded play list (Not supported!).
LIST PLAY
EDIT
OPEN/CLOSE
7. [OPEN/CLOSE] key
Opens or closes the disk tray.
