15-6
You can set the mute recording time when the SHIFT
indicator is lit.
This setting is dependent on files and is maintained
after you turn off the power.
You can save or load the setting.
Mute recording time
You can set the recording time of the slate tone when
the SHIFT indicator is lit.
This setting is dependent on files and is maintained
after you turn off the power.
You can save or load the setting.
Slate tone recording time
Default: 5 sec.
“0 sec”~”30sec”
Default: 10 sec.
“0 sec”~ “30sec”
Flashing
Flashing
Flashing
Flashing
You can set the peak hold time of the level meters
on the display.
This setting is global and is not dependent on files.
The setting is maintained after you turn off the
power. You can save or load the setting.
Peak hold time setting
The default is "3sec".
“0 sec” ~ “9sec” or “∞”
You can activate or deactivate the GPI function.
This setting is global and is not dependent on files.
The setting is maintained after you turn off the
power. You can save or load the setting.
GPI on/off
“Off”
“On”
The GPI function is deactivated. This is the default.
The GPI function is activated.
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
GND
STOP
PLAY
>>
<<
Feeding the "low" pulse signal is equivalent
to pressing the [STOP] key.
Feeding the "low" pulse signal is equivalent
to pressing the [PLAY] key.
Feeding the "low" pulse signal is equivalent
to pressing the [>>] key.
Feeding the "low" pulse signal is equivalent
to pressing the [<<] key.
GPI IN ports
By making "TTL level, low active" ports to low, the follow-
ing functions are took place.
The minimum input pulse width: 15 msec (except for Pin 3/PLAY, whose
minimum input pulse width is 5 msec).
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
GND
EVENT 1
EVENT 0
EVENT 2
EVENT 3
The event is output at CUE point 1.
The event is output at CUE point 0.
The event is output at CUE point 2.
The event is output at CUE point 3.
GPI OUT ports
The following events can be output during playback.
A low level, 60 msec width pulse is output during recording and play-
back.
Flashing
Flashing
Flashing
Flashing
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
