15-5
You can select whether or not the keys/controls on
the front panel of the unit are disabled (locked) when
setting the [CONTROL] key to "REMOTE".
This setting is global and is not dependent on files.
The setting is maintained after you turn off the
power. You can save or load the setting.
Panel lock on/off
“Off”
“On”
The keys/controls on the front panel of the unit are not
disabled (locked). This is the default setting.
The keys/controls on the front panel of the unit are
disabled (locked).
Flashing
Flashing
You can set the following items related with the RS-
422.
1. Device code
2. Sync Play On/Off
3. Editor preset
These setting items are dependent on files and are
maintained after you turn off the power. You can
save or load the settings.
By pressing the [ENTER/YES] key while "RS422 Setup?"
is shown, "Device?DV40" appears (in the initial con-
dition). Pressing the jog dial switches between the
setting items.
Setting RS-422
SETUP
SETUP
SETUP
SETUP
Flashing
Flashing
Flashing
Flashing
To make setting, select the desired setting items and
press the [ENTER/YES] key, then select the desired
option using the jog dial and press the [ENTER/YES]
key.
1. Device code
You can emulate the device code of the DV40 to the
other device.
SETUP
Flashing
SETUP
Flashing
“DV40”
“BVW-75”
Device code is “DV40” (default setting).
Device code is “BVW-75”. The unit emulates the BVW-
75.
2. Sync play On/Off
This items sets whether or not to lock to the incom-
ing video reference frame when receiving the RS-
422 play command. If you connect the DV40 to an
editor, set it to "On".
SETUP
Flashing
Flashing
“Off”
“On”
The Sync play function is active (default setting).
The Sync play function is not active.
3. Editor Preset
Set this item appropriately to match the editor con-
nected, so that the DV40 can response correctly.
SETUP
Flashing
SETUP
“Video”
“Lynx”
for connecting with a Lynx synchronizer.
for connecting with a video editor (default setting).
Flashing
SETUP
SETUP
SETUP
