2-9
28. [CUE POINT] ([PREVIEW]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• In the normal display mode, pressing this key enters the cue point edit mode, in
which you can edit cue point data. Pressing this key after pressing the [STORE] key
stores the holding time to a cue point.
99 cue points (01 through 99) are available. You can give a name for each point.
See "Chapter 6: Storing time data" for details.
When SHIFTed:
• Pressing this key while stopped executes the fade-in preview at the desired cue
point. See "Chapter 8: Preview function" for details.
29. [DEST-OUT] ([PREVIEW]/[TR 4]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• Displays time data stored in this key so that you can edit the data.
• Pressing this key after pressing the [STORE] key stores the holding time or edited
time to the DEST-OUT point.
• When editing track data, this key selects track 4.
When SHIFTed:
• Pressing this key while stopped executes the fade-in preview at the DEST-OUT
point.
30. [LOCATE] key
Locates to the point where you pressed the [LOCATE] key last time.
The data stored in this key is overwritten each time you press the key.
31. [DEST-IN] ([PREVIEW]/[TR 3]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• Displays time data stored in this key so that you can edit the data.
• Pressing this key after pressing the [STORE] key stores the holding time or edited
time to the DEST-IN point.
• When editing track data, this key selects track 3.
When SHIFTed:
• Pressing this key while stopped executes the fade-out preview at the DEST-OUT
point.
32. [UNDO] key
By pressing this key, the history of the current audio file can be referred to, allowing
execution of the multiple undo function.
To execute the multiple undo function, select a desired history item using the jog
dial and press the [ENTER/YES] key.
See "Chapter 4: Audio recording/playback" for details.
33. [SOURCE-OUT] ([PREVIEW]/[TR 2]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• Displays time data stored in this key so that you can edit the data.
• Pressing this key after pressing the [STORE] key stores the holding time or edited
time to the SOURCE-OUT point.
• When editing track data, this key selects track 2.
When SHIFTed:
• Pressing this key while stopped executes the fade-in preview at the SOURCE-OUT
point.
CUE POINT
IN DST
PREVIEW
OUT
TR3
TR4
LOCATE
IN DST
PREVIEW
OUT
TR3
TR4
UNDO
OUTIN
TR1
SOURCE
TR2
