7-3
• Location to the last playback start position
You can locate to the point between ABS 0 and REC END where playback started last time.
1. When the recorder is stopped, press the [MEMORY] key.
The display shows the screen for recalling a locate point memory.
The first time you press the [MEMORY] key after turning on the power, "Last Play" is shown with flashing
"01". This shows that locate memory "01" of the MEMORY bank holds time data of the point where
playback started last time.
HMSFSF
MEMORY
ABS
2. Press the [LOCATE] key.
The recorder locates to the MEMORY "01" point and the display returns to the Normal screen.
Each time the recorder is played back, the MEMORY "01" point is overwritten.
• Location to the last recording start position
You can locate to the point between ABS 0 and REC END where recording started last time.
1. When the recorder is stopped, press the [MEMORY] key and use the jog dial to select "02".
When "02" is selected, "Last Record In" is shown, as MEMORY "02" holds time data of the point where
recording started last time.
HMSFSF
MEMORY
ABS
2. Press the [LOCATE] key.
The recorder locates to the MEMORY "02" point and the display returns to the Normal screen.
Each time you make recording, the MEMORY "02" point is overwritten.
• Location to the last recording end position
You can locate to the point between ABS 0 and REC END where recording ended last time.
1. When the recorder is stopped, press the [MEMORY] key and use the jog dial to select "03".
When "03" is selected, "Last Record Out" is shown, as MEMORY "03" holds time data of the point where
recording ended last time.
2. Press the [LOCATE] key.
The recorder locates to the MEMORY "03" point and the display returns to the Normal screen.
Each time you make recording, the MEMORY "03" point is overwritten.
HMSFSF
MEMORY
ABS
Flashing
Flashing
<Note>
The recorder does not always locate to the REC END of an audio file when selecting MEMORY "03".
If you started insert recording and stopped recording before the REC END point last time, the re-
corder locates to the point where recording ended last time, instead of the REC END point.
Flashing
