11-3
Turning On LIST PLAY mode
1. Press the [LIST PLAY/(EDIT)] key and rotate the jog dial.
When the [LIST PLAY/(EDIT)] key is pressed, the following appears on the DV40 FL display.
The default setting of the LIST PLAY mode is “LTC_Link”. By rotating the jog dial C.W., you can choose
the “SongLink” mode.
Flashing
Flashing
2. Press the [ENTER/YES] key.
After pressing the [ENTER/YES] key, “<<Wait!>>” message starts flashing for a short while indicating
that DV40 is creating a linked file list on the DV40 FL display. Then, the [LIST PLAY/(EDIT)] key will be lit
solid. This indicates that the selected LIST PLAY mode is turned ON.
3. Press the [PLAY] key.
Pressing the [PLAY] key allows to reproduce the linked multiple files.
<Note>
Pressing the
[FILE SEL]
key when the LIST PLAY mode is on allows to select either the “
LTC_Link
” or
“
SongLink
” mode.
Confirming Linked Files
Pressing the [SKIP/CURSOR >>I] or [SKIP/CURSOR I<<] key allows to locate to the beginning of
each linked file in the ascending/descending order respectively. When the files 001 ~ 006
are linked as shown in the drawing below.
01h00m00s00f 01h00m30s00f 01h01m00s00f 01h01m30s00f 01h02m00s00f
File No. 001 File No. 002 File No. 003 File No. 006 <<Silent Area>>
01h02m30s00f
File No. 004
SongLink
by pressing the [SKIP/CURSOR >>I] or [SKIP/CURSOR I<<] key, the followings appear on the DV40 FL
display.
Press [SKIP/CURSOR >>I] key
Press [SKIP/CURSOR >>I] key
Press [SKIP/CURSOR >>I] key
Press [SKIP/CURSOR >>I] key
Press [SKIP/CURSOR I<<] key
Press [SKIP/CURSOR I<<] key
Press [SKIP/CURSOR I<<] key
Press [SKIP/CURSOR I<<] key
