![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/ce/bcef38b3-9fd0-4e39-a158-99e3172a8bba/bcef38b3-9fd0-4e39-a158-99e3172a8bba-bg6a.png)
10-4
Inserting track data
You can copy track data between the "SOURCE IN" and "SOURCE OUT" points to the clipboard
and insert it to the "DEST IN" point on the same or a different track.
1. Store the "SOURCE IN", "SOURCE OUT" and "DEST IN" points.
See "Chapter 6: Storing time data" for details about how to store edit points.
2. If necessary, trim these edit points using the preview function.
See "Chapter 8: Preview function" for details about how to trim edit points.
3. While stopped, press the [AUDIO EDIT] key to show "Copy Clip?" on the display, followed by the
[ENTER/YES] key.
By pressing the [ENTER/YES] key, "Sel.Copy TRK?" appears on the display.
4. Press the appropriate edit point key(s) ([SOURCE IN], [SOURCE OUT], [DEST IN] or [DEST OUT] keys)
to select the copy source track(s), and press the [ENTER/YES] key.
These edit point keys are used to select tracks 1 through 4 (TR 1 through TR 4), as labeled below the keys.
Depending on the track mode of the audio file, the selectable tracks are restricted (see the <note> above).
Pressing the [ENTER/YES] key copies data to the clipboard immediately. The display shows "Completed!"
momentarily followed by "Paste Clip?".
Flashing
Tips:
The REC END point of the file to which track data is inserted to moves backward.
Sound data A
Sound data A
SOURCE IN
point
SOURCE OUT
point
DEST IN
point
<Note>
You cannot carry out the insert operation with a
"Tape mode"
audio file.
<Note>: The source and destination
The table below shows the relations among the track modes, selectable source tracks and selectable
destination tracks. You can insert data to a different track only when selecting a single track in a STEREO
or MULTI (4TR) file as the source track . When selecting 2 or 4 tracks in a STEREO or MULTI (4TR) file, you
can insert data only to the same tracks.
MONO mode
STEREO mode
MULTI (4TR) mode
Selectable source tracks
track 1 only
Selectable destination tracks
track 1
track 1 or 2
tracks 1 and 2
track 1 or 2 freely
same tracks as the source
any one of tracks 1 through 4 any one of tracks 1 through 4 freely
any two of tracks 1 through 4
same 2 tracks as the source
tracks 1 through 4
same tracks as the source
Track mode
Flashing