6-9
Clearing a CUE or MEMORY point memory
You can clear an unnecessary locate point memory (CUE or MEMORY).
1. While stopped, press a desired locate point key ([CUE POINT] or [MEMORY] key).
The display shows the locate bank and memory number (e.g. "Cue 03"), and a locate point time with
flashing memory number.
The following is a display example when pressing the [CUE POINT] key.
2. Use the jog dial (or the numeric keys) to select a locate point memory you want to clear, and press a
desired locate point key ([CUE POINT] or [MEMORY] key) three times.
"CUE Delete" is shown with flashing "Sure?".
HMSFSF
2
1
-INT-
BWF
FORMAT
CLOCK
-0.1%
kHz
48
24
FS
BIT
ABSCUE
∞
60
50
42 34 28 2018
12
8
6543210OL
Flashing
HMSFSF
2
1
-INT-
BWF
FORMAT
CLOCK
-0.1%
kHz
48
24
FS
BIT
ABSCUE
∞
60
50
42 34 28 2018
12
8
6543210OL
Flashing
3. Press the [ENTER/YES] key.
The selected locate point memory is cleared and the display returns to the Normal screen.
Tips:
After a memory is cleared, "--H --M --S --F --SF" (showing that the memory is vacant) is shown on the
display.
When locate point memory numbers are not continuous after some are cleared, or when memories are
not numbered in order of ABS time, you can renumber them continuously in order of ABS time.
