Next Available Option:
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash.(p. 107)
■ copy usb flash
Copy data to the switch system image le.
Next Available Option:
■ image-name -- Specify filename for the USB transfer. (ASCII-STR) (p. 117)
■ copy flash
Copy the switch system image le.
Next Available Options:
■ flash < primary | secondary > -- Copy to primary/secondary flash.(p. 116)
■ tftp -- Copy data to a TFTP server.(p. 124)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■ usb -- Copy data to a USB flash drive.(p. 133)
■ copy flash flash < primary | secondary >
Copy to primary/secondary ash.
Supported Values:
■ primary -- Copy to primary flash.
■ secondary -- Copy to secondary flash.
image-name
■ copy usb flash IMAGE-NAME
Specify lename for the USB transfer.
Next Available Option:
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash.(p. 107)
manager
■ copy tftp pub-key-file IP-ADDR FILENAME manager
Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).
Next Available Option:
■ append -- Add the key(s) for access.(p. 102)
■ copy tftp pub-key-file IPV6-ADDR FILENAME manager
Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).
Next Available Option:
■ append -- Add the key(s) for access.(p. 102)
117© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide
