Copy data to a USB ash drive.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ copy event-log usb
Copy data to a USB ash drive.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
xmodem
■ copy xmodem
Use xmodem on the terminal as the data source.
Next Available Options:
■ flash -- Copy to primary/secondary flash.(p. 116)
■ startup-config -- Copy data to the switch configuration file.(p. 123)
■ command-file -- Copy command script to switch and execute.(p. 106)
■ config -- Copy data to specified configuration file. (ASCII-STR) (p. 106)
■ copy command-output COMMAND-OUTPUT xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy config < config1 | config2 | config3 > xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy crash-data SLOT-ID-RANGE xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-data mm xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-data xmodem
Use xmodem on the terminal as the data destination.
135© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide
