A SERVICE OF

logo

Open as PDF
next previous
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
■ vlan VLAN-ID ip rip all receive < V1-only | V2-only | V1-or-V2 | ... >
Dene RIP version for incoming packets.
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
retransmit-interval
■ vlan VLAN-ID ip ospf retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■ vlan VLAN-ID ip ospf IP-ADDR retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■ vlan VLAN-ID ip ospf all retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
rip
■ [no] vlan VLAN-ID ip rip
Usage: [no] ip rip [...]
Description: Enable/disable/congure Routing Internet Protocol (RIP)
on the VLAN interface.
Called without 'no', the command enables RIP on the interface.
Otherwise ('no' is specied), the command disables RIP on the
interface. The command can be followed by a RIP conguration
command. Use 'ip rip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ authentication-type < none | text > -- Set authentication type used on this interface.(p. 718)
■ authentication-key -- Set RIP authentication key (maximum 16 characters).(p. 717)
■ metric < 1 to 15 > -- Set metric for this interface.(p. 734)
■ poison-reverse -- Enable/disable poison reverse on this interface.(p. 741)
■ receive < V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming packets.(p. 745)
■ send < disabled | V1-only | V1-compatible-V2 | ... > -- Define RIP version for outgoing packets.(p.
747)
■ rip-compatible < V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and outgoing
packets.(p. 747)
746© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide