traceroute6
OVERVIEW
Category:
operatorPrimary context:
ping (page 392)Related Commands
traceroute (page 690)
ping6 (page 395)
Usage: traceroute6 <IPV6-ADDR|hostname> [minttl <1-255>]
[maxttl <1-255>] [timeout <1-120>]
[probes <1-5>]
Description: Trace the IPv6 route to a device on the network.
Parameters:
o IPV6-ADDR - IPv6 address of device to which to send traceroute.
o hostname - Hostname of deivce to which to send IPv6 traceroute.
o [minttl <1-255>] - Minimum number of hops used in outgoing probe
packets. The default value is 1.
o [maxttl <1-255>] - Maximum number of hops used in outgoing probe
packets. The default value is 30.
o [timeout <1-120>] - Time (in seconds) to wait for a response to a
probe. The default value is 5 seconds.
o [probes <1-5>] - Number of probe queries to send out for each hop.
The default value is 3.
Examples:
(1) hp-switch# traceroutev6 80fe::20b:cdff:fedd:9a62
(2)ProCurve# traceroute6 2001:db8::10
traceroute to 2001:db8::10
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 2001:db8::a:1c:e3:3 0 ms 0 ms 0 ms
2 2001:db8:0:7::5 7 ms 3 ms 0 ms
3 2001:db8::214:c2ff:fe4c:e480 0 ms 1 ms 0 ms
4 2001:db8::10 0 ms 1 ms 0 ms
COMMAND STRUCTURE
■ traceroute6 host-name -- Hostname of the destination device. (ASCII-STR) (p. 696)
■ maxttl < 1 to 255 > -- Maximum time to live <1-255>. (p. 697)
■ minttl < 1 to 255 > -- Minimum time to live <1-255>. (p. 697)
■ probes < 1 to 5 > -- Number of Probes <1-5>. (p. 698)
■ timeout < 1 to 120 > -- Traceroute timeout in seconds <1-120>. (p. 698)
695© 2009 Hewlett-Packard Development Company, L.P.
