A SERVICE OF

logo

1 Publication 20D-UM002C-EN-P - November 2003
Chapter
5
Configuring DriveLogix Motion
Using This Chapter
This chapter introduces DriveLogix motion. The steps in this chapter provide
the minimum settings required to begin testing of DriveLogix motion.
System Requirements
PowerFlex 700S Drive with firmware revision 2.03 or higher
DriveLogix controller with firmware revision 12.XX or higher
DriveExecutive programming software version 2.02 or higher
RSLogix 5000 programming software version 12 or higher
For information about: See page
Configuring the Drive 5-1
Programming the Controller 5-5
Supported Motion Commands 5-12