Defaults Not configured
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage
Information
You cannot delete a terminal connection.
Related
Commands
access-class — restricts the incoming connections to a particular IP address in an
IP access control list (ACL).
password — specifies a password for users on terminal lines.
login concurrent-session
Configures the limit of concurrent sessions for all users on console and virtual terminal lines.
Syntax
login concurrent-session {limit number-of-sessions | clear—line
enable}
no login concurrent-session {limit number-of-sessions | clear—
line enable}
Parameters
limit number-
of-sessions
Sets the number of concurrent sessions that any user can
have on console and virtual terminal lines. The range is from
1 to 12 (10 VTY lines, one console, and one AUX line).
Control and Monitoring
121
