Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
The following describes the show userscommand shown in the following
example.
Field Description
(untitled) Indicates with an asterisk (*) which terminal line you are
using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
Dell#show users
Authorization Mode: role or privilege
Line User Role Privilege Host(s) Location
0 console 0 admin sysadmin 15 idle
*3 vty 1 sec1 secadmin 14 idle 172.31.1.4
4 vty 2 ml1 netadmin 12 idle 172.31.1.5
Related
Commands
username — enables a user.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before
timing out.
Z9500
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response
command.
Parameters
seconds
Enter a number of seconds the software waits before logging
you out. The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default
is 0 seconds (no timeout).
Security
1625
