Parameters
rp Enter the keyword rp to clear the software trace log from
the Route Processor CPU.
linecard slot-id Enter the linecard slot-id parameters to specify the
line-card CPU whose software trace log you want to clear.
Defaults Clear the trace log files from all Z9500 CPUs.
Command
Modes
CONFIGURATION
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
Usage
Information
Trace log information is uploaded to flash:/TRACE_LOG_DIR.
configure
Enter CONFIGURATION mode from EXEC Privilege mode.
Z9500
Syntax
configure [terminal]
Parameters
terminal (OPTIONAL) Enter the keyword terminal to specify that
you are configuring from the terminal.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Control and Monitoring
99
