Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM|
Status
| | | |per Port |
(Allowed ports)
0 0 L2ACL 500 200
Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200
Allowed (2)
Dell#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
Z9500
Syntax
threshold min number max number
To remove the threshold values, use the no threshold min number max
number command.
Parameters
min number Enter the keyword min then the minimum threshold number
for the WRED profile. The range is from 0 to 12000KB.
max number Enter the keyword max then the maximum threshold number
for the WRED profile. The range is from 0 to 12000KB.
Defaults none
Command
Modes
CONFIGURATION (config-wred)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Quality of Service (QoS)
1521
