show running-config pim
Display the current configuration of PIM-SM snooping.
Syntax
show running-config pim
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the E-Series ExaScale.
Example
Dell#show running-config pim
!
ip pim snooping enable
IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
clear ipv6 pim tib
Clear the IPv6 PIM multicast-routing database (tree information base-TIB).
Z9500
Syntax
clear ipv6 pim tib [group-address]
Parameters
group-address (OPTIONAL) Enter the multicast group address in the
x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
PIM-Sparse Mode (PIM-SM)
1403
