Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-
Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
The default burst size is 100Kb. If a different value is required, you must configure
the burst size to the required value.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-input — creates a QoS output policy.
rate-shape
Shape traffic output as part of an output QoS policy.
Z9500
Syntax
rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets}
[committed {kbps | pps} committed-rate {burst-kbps | burst-
packets}]
Parameters
kbps Enter the keyword kbps to specify the rate limit in kilobits
per second (Kbps). The range is from 0 to 40000000.
pps Enter the keyword pps to specify the rate limit in packets per
second (pps). The range is from .
burst-kbps Enter the peak rate or committed rate size in kilobits per
second. The range is from . The default is .
burst-packets Enter the peak rate or committed rate size in packets per
second. The range is from . The default is .
Defaults
Command
Modes
QOS-POLICY-OUT
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
1504
Quality of Service (QoS)
