show ip dhcp conflict
Display the address conflict log.
Z9500
Syntax
show ip dhcp conflict address
Parameters
address Display a particular conflict log entry.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp lease
Display lease information about the dynamic IP address currently assigned to a DHCP client interface.
Z9500
Syntax
show ip dhcp dhcp lease [interface type slot/port]
Parameters
interface type
slot/port
Enter the keyword interface with the interface type and
slot/port information to display DHCP lease information for a
specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Defaults none
720
Dynamic Host Configuration Protocol (DHCP)
