show dot1x interface — displays the 802.1X information on an interface.
dot1x auth-server
Configure the authentication server to RADIUS.
Z9500
Syntax
dot1x auth-server radius
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
dot1x guest-vlan
Configure a guest VLAN for limited access users or for devices that are not 802.1X capable.
Z9500
Syntax
dot1x guest-vlan vlan-id
To disable the guest VLAN, use the no dot1x guest-vlan vlan-id command.
Parameters
vlan-id Enter the VLAN Identifier. The range is from 1 to 4094.
Defaults Not configured.
Command
Modes
CONFIGURATION (conf-if-interface-slot/port)
Security
1643
