Version Description
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
WRED1 2000 7000
test cam-usage
Verify CAM usage for an input policy-map configuration.
Z9500
Syntax
test cam-usage service-policy input policy-map linecard {slot-
id port-set port-pipe| all}
Parameters
policy-map Enter the policy map name.
linecard slot-id
port-set port-
pipe
(OPTIONAL) Enter the slot number of a line card and a port-
pipe number to verify CAM usage on a specified set of ports.
Valid Z9500 slot IDs are 0 to 2. The range of valid port-pipe
numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and
2.
linecard all (OPTIONAL) Enter the keywords linecard all to verify
CAM usage on all line cards.
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Quality of Service (QoS)
1519
