Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
Related
Commands
show ipv6 prefix-list — View the selected IPv6 prefix-list.
maximum-paths
Configure the maximum number of parallel routes (multipath support) BGP supports.
Z9500
Syntax
maximum-paths {ebgp | ibgp} number
To return to the default values, use the no maximum-paths command.
Parameters
ebgp Enter the keyword ebgp to enable multipath support for
External BGP routes.
ibgp Enter the keyword ibgp to enable multipath support for
Internal BGP routes
number Enter a number as the maximum number of parallel paths.
The range is 1 to 16. The default is 1.
Defaults 1
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
If you enable this command, use the clear ip bgp command to recompute the
best path.
536
Border Gateway Protocol
