Parameters
vlan-id Enter the name of a VLAN id or list of the VLANs to enable
DHCP Snooping.
Defaults Disabled
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command-Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
ip dhcp source-address-validation
Enable the IP Source Guard.
Z9500
Syntax
[no] ip dhcp source-address-validation [ipmac]
Parameters
ipmac Enable IP+MAC Source Address Validation.
Defaults Disabled
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Added the keyword ipmac.
7.8.1.0 Introduced on the C-Series and S-Series.
734
Dynamic Host Configuration Protocol (DHCP)
