A SERVICE OF

logo

Open as PDF
next previous
IES-1000 User’s Guide
11-10 ADSL Module Port Setup
Figure 11-5 ADSL Port Setup Edit
The following table describes this screen.
Table 11-6 ADSL Port Setup Edit
LABEL DESCRIPTION
Channel Setup Click this link to go to the port's Channel Setup screen.
Port Setup Click this link to go to the Port Setup screen.
Name Type a descriptive name to identify the port.
Active Select this check box to turn on this ADSL port. The ADSL ports are disabled by default
because an enabled but disconnected ADSL port generates more heat than an operating port.
Disable ADSL ports when they are not in use to minimize heat generation and enhance
reliability.
Default 802.1p
Priority
Type the priority value (0 to 7) to add to incoming frames without a (IEEE 802.1p) priority tag.
Profile Use the drop-down list box to select a profile to assign to this port.
Mode Use the drop-down list box to select the ADSL operational mode for this port.