IES-1000 User’s Guide
22-4 Commands Introduction
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
enable [1 | 2]
Turns on IGMP snooping. 1 sets
unknown-discard mode, 2 sets
unknown-flood mode.
disable
Turns off IGMP snooping.
timeout [<seconds>]
Sets how long the IES-1000 retains
entries in the multicast filtering
database.
mfilter
Displays the multicast filtering
database.
fpvid
Displays default port VLAN IDs in Fast
Mode.
Sets a default port VLAN ID in Fast
Mode.
macfilter
Displays the MAC filtering status and
setting on all ports.
Displays the MAC filtering status and
setting on the specified port.
Enables the MAC filtering mechanism.
Disables the MAC filtering mechanism.
Adds a source MAC address from
which to forward packets.
Deletes a source MAC address from
which to forward packets.
Displays the system’s current MAC
address count filter settings for that
port.
enable [port]
Turns on the MAC address count filter.
disable [port]
Turns off the MAC address count filter.
set <port> <max 1> <max 2>
Sets the MAC address count filter.
version
Displays bridge information.
buffer
list
Displays all buffer pools.
info
Shows the current buffer pool’s
information.
Sets the current buffer pool to
<poolName> and shows the pool’s
information.
show
Shows all buffers in the current buffer
pool.
