IES-1000 User’s Guide
Commands Introduction 22-3
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
bridge
config save
Saves the bridge’s run time
configuration to nonvolatile memory.
print
Shows the bridge’s run time
configuration.
reset
Reloads the bridge’s run time
configuration from nonvolatile memory.
device
Shows the bridge settings.
add <edd | xport/[1..8]>
Adds a bridge device.
delete <edd | xport/[1..8]>
Deletes a bridge device.
list
Displays the bridge devices.
ethertype
Displays the types of packets that the
ports are set to forward.
<port> <any | ip | pppoe>
Sets the type of packets that a port is
allowed forward.
filter
Displays the filtering database.
filterage
Displays the filter age time.
<seconds>
Sets the filter age time.
flush
Clears the filtering database for all
ports.
Clears the filtering database on an
individual port.
info
Shows bridge information.
interface files
Shows files opened by upper layer.
info
Shows ether-support driver
information.
stats
Shows bridge upper interface
statistics.
version
Shows ether-support driver
information.
portfilter
Displays ports to forward to.
<srcPort> <all | destPorts>
Sets ports to forward to.
status
Displays bridge management
statistics.
igmpsnoop
Displays the multicast filtering
database.
flush
Clears all stored IGMP snooping
records.
