IES-1000 User’s Guide
Bridge Commands 28-3
<port> =
A bridge port number.
<mac> =
The source MAC address in "00:a0:c5:12:34:56" format.
This command adds a source MAC address fixed on a specified port. You may add up to five MAC addresses.
28.4.5 MAC Filter Delete Command
Syntax:
192.168.1.1 bridge> macfilter delete <port> <mac>
where
<port> =
A bridge port number.
<mac> =
The source MAC address in "00:a0:c5:12:34:56" format.
This command removes a configured source MAC address from a port specified by you.
28.5 Filter Commands
28.5.1 Filter Command
Syntax:
192.168.1.1 bridge> filter
This command displays the filtering database.
28.5.2 Mfilter Command
Syntax:
192.168.1.1 bridge> mfilter
This command displays the multicast filtering database. The mfilter command is what allows you to
monitor the IES-1000’s IGMP snooping activities.
The following is an example of a multicast filtering database.
Figure 28-1 Mfilter Command Example
192.168.1.1 bridge> mfilter
ID VLAN ID GDA MAC Member Ports
================================================================================
1 0 239.255.255.250 7f-ff-fa 1
2 0 224.000.001.022 00-01-16 1
Total 2 entries.
IGMP Snooping Enabled
IGMP version 1
Query Received 949
Max Response Time 100 * 1/10 seconds
Query Interval 15 seconds
