IES-1000 User’s Guide
22-14 Commands Introduction
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
chs [<start port> [<stop
port>]]
Shows the contents of all PVC
channels in all ports or in the specified
ports.
Shows the contents of the specific VC
profile.
vcps
Shows the contents of all VC profiles.
Shows the setting and status of the
specified GSHDSL port.
ports
Shows the setting and status for all
G.SHDSL ports.
profiles
Shows the contents of all profiles and
profiles applied to all G.SHDSL ports.
bond
Shows all bonding groups.
nwire
Shows all n-wire groups
setname
<port number> <port name>
Sets the name of a G.SHDSL port.
Displays the name of a G.SHDSL port.
getnames
Displays the names of all G.SHDSL
ports.
monitor
Shows port statistics of all GSHDSL
ports.
<startPort>
Shows port statistics of GSHDSL ports
from the specified start port to the end.
<startPort><stopPort>
Shows port statistics of GSHDSL ports
from the specified start port to the
specified end port.
ver
Shows version information of GSHDSL
modem code and driver.
loopback
<portNo> local | f5
Does a local/OAM F5 loopback test on
the specified GSHDSL port.
stat
ch <port> <vpi> <vci>
Shows the statistics of the specified
PVC channel.
chs [<start port> [<end port>]]
Shows the statistics of all PVC
channels in all ports or in the specified
port.
clear
ch <port> <vpi> <vci>
Clears the statistics of the specified
PVC channel.
chs [<start port> [<end port>]]
Clears the statistics of all PVC
channels in all ports or in the specified
port.
hmon
display
Shows the temperature values.
