IES-1000 User’s Guide
IEEE 802.1X Commands 30-3
30.2.8 Port Re-authentication Command
Syntax:
192.168.1.1 dot1x> port reauth <port> <on|off>
where
<port> =
A port number (1 to 8).
<on|off> =
Use on to require a subscriber to periodically re-enter his or her username and
password to stay connected to the port (some IEEE 802.1X clients do this
automatically).
Use
off to not require a subscriber to periodically re-enter his or her username
and password to stay connected to the port.
This command sets whether or not a subscriber has to periodically re-enter his or her username and password to
stay connected to the specified port.
30.2.9 Port Period Command
Syntax:
192.168.1.1 dot1x> port period <port> <value>
where
<port> =
A port number (1 to 8).
<value> =
How often (60~65535 seconds) a subscriber has to re-enter his or her username
and password to stay connected to the port.
This command sets how often a subscriber has to re-enter his or her username and password to stay connected to
the specified port.
30.2.10 Port Status Command
Syntax:
192.168.1.1 dot1x> port status <port>
where
<port> =
A port number (1 to 8).
This command displays the current status of the IEEE 802.1X security feature on the specified port.
30.2.11 RADIUS IP Command
Syntax:
192.168.1.1 dot1x> radius ip <addr>
where
