IES-1000 User’s Guide
Diagnostic 20-5
Table 20-3 Log Messages
LOG MESSAGE TYPE DESCRIPTION
THERMO RELEASE OVER
RANGE: dev:<device id>
value:<temp>
WARN
The temperature detected in the network module has come back to
normal.
<temp> - temperature when the entry was logged
Insecure Telnet From
<ip addr>
WARN
Someone tried to start a Telnet session from the listed IP address
and it did not match any of the configured secured client IP
addresses.
Incorrect Telnet
Password
WARN
Someone attempted to use the wrong password to start a Telnet
session.
Telnet Session Begin INFO
A Telnet session has started.
Telnet Session End INFO
A Telnet session has terminated.
20.3.2 DSL Line Diagnostic Screen
Click DSL in the Diagnostic screen to open the DSL Line Diagnostic screen.
Use this screen to check the module’s DSL chip via Local Loopback or connections via OAM F5 tests.
Figure 20-2 DSL Line Diagnostic
Table 20-4 DSL Line Diagnostic
LABEL DESCRIPTION
Diagnostic Click this link to go to the network module’s Diagnostic screen.
