IES-1000 User’s Guide
25-8 G.SHDSL Commands
192.168.1.1 gshdsl> show profiles
The show profiles command displays the settings of all the G.SHDSL profiles.
25.3.15 Set Port Command
Syntax:
192.168.1.1 gshdsl> set port <port #> <profile name>
where
<port #> =
The number of the port to which you want to assign a profile.
<profile name> =
The profile that defines the minimum and maximum transfer rates for this
port.
The set port command assigns a specific profile to an individual port. The profile defines the maximum
and minimum transmission rates and the Power Spectral Density region.
25.3.16 Set Ports Command
Syntax:
192.168.1.1 gshdsl> set ports <profile name>
where
<profile name> =
The profile that defines the minimum and maximum transfer rates for this
port.
This CI command is like the Set Port Command described in section 25.3.15 except that this command
configures all G.SHDSL ports to have a specified profile. Enter the list ports command to view the status
of all ports.
25.3.17 Set PVC Command
Syntax:
192.168.1.1 gshdsl> set pvc <port #> <multiplexing mode> <tx vpi> <tx vci>
[<rx vpi> <rx vci>]
where
<port #> =
A port number, from 1 to 8.
<multiplexing mode> =
Either “llc” or “vc"
<tx vpi> =
The VPI setting of the G.SHDSL port for use with a Tx based
network.
<tx vci> =
The VCI setting for the G.SHDSL port for use with a Tx based
network.
<rx vpi> =
The VPI setting for the G.SHDSL port for use with Rx based
networks.
<rx vci> =
The VCI setting for the G.SHDSL port for use with Rx based
