IES-1000 User’s Guide
15-6 VLAN
The following table describes this screen.
Table 15-3 Add VLAN Static Entry
LABEL DESCRIPTION
VLAN Setup Click this link to go to the Static VLAN Setup screen.
VLAN ID This is the ID number of VLAN group index number you clicked in the Static VLAN Setup
page.
Name Type a name to identify the VLAN.
Port Number This field displays the port number.
Normal Select Normal registration for the associated port if you want that port to join this VLAN
group using GVRP.
Fixed Fixed registration ports are permanent members of this VLAN group.
Forbidden Select forbidden for a port to block that port from joining this VLAN group.
Tx Tagging Select Tx Tagging for the associated port if you want that port to tag all outgoing frames
transmitted. Only select this if the subscriber’s DSL modem or router supports IEEE
802.1Q VLAN.
Apply Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to the left to save your changes to the non-volatile memory when you are
done configuring.
Reset Click Reset to begin configuring this page afresh.
