A SERVICE OF

logo

Open as PDF
next previous
IES-1000 User’s Guide
IP Commands 33-5
Syntax:
192.168.
1.1 ip> enable [<if> [mtu <size> [<ip> [<ipmask>]]]
where
<i/f> =
The name of an interface (“ether” for this device).
[mtu <size>] =
Maximum Transmit Unit. The maximum packet size that this interface is to
send.
<ip> =
The IP address of the device’s interface.
<ipmask> =
The subnet mask of the device’s IP address.
This command sets the Ethernet port’s IP address, subnet mask and the largest packet size that this interface
sends.